Samsung-Galaxy S6 Edge+SM-G928F-G928FXXU2AOK1 Android 5.1.1 Lollipop firmware-flash-file-100%-Tested-Free-Download

Samsung-Galaxy S6 Edge+SM-G928F-G928FXXU2AOK1 Android 5.1.1 Lollipop firmware-flash-file-100%-Tested-Free-Download 

How To Install G928FXXU2AOK1 Android 5.1.1 Lollipop On Galaxy S6 Edge+ SM-G928F Manually

1. Download Odin v3.09 and G928FXXU2AOK1 (for all countries except carrier locked model) firmware.Samsung USB Driver
2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
5. Now, put the Galaxy S6 Edge+ SM-G928F in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
11. Once flashing completed, your Galaxy S6 Edge+ SM-G928F will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy S6 Edge+ SM-G928F to Android 5.1.1 Lollipop firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy S6 Edge+ SM-G928F

If Galaxy S6 Edge+ SM-G928F stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.
That’s it! Let us know about your latest Android 5.1.1 Lollipop experience.